Low Five Tech
  • Home
  • Gadgets
  • Networking
  • Social Media
  • About Us
No Result
View All Result
  • Home
  • Gadgets
  • Networking
  • Social Media
  • About Us
No Result
View All Result
No Result
View All Result
Home Gadgets

Windows 10 Won’t Boot After RAM Upgrade! (Fixed)

Sara Benoit by Sara Benoit
in Gadgets
0
windows 10 won't boot after ram upgrade

One of the most important upgrades a user can make is to increase the amount of RAM in a computer.

This is designed to assist with short-term data processing, which helps with overall speed and performance. Unfortunately, things don’t always work out as planned when the upgrade is made.

If you are using Windows 10, you might be dealing with an issue where nothing is working. If Windows 10 won’t boot after a RAM upgrade, it’s time to look at what the root cause is.

If Windows 10 won’t boot after a RAM upgrade, the most common reason is non-compatible RAM. To test this theory, remove the new RAM and replace it with the older one to see if the computer starts. If it does, the compatibility issue is causing the problem. The next step is to flash the BIOS for it to re-read the RAM.

You must look at all options before flashing the BIOS. This should be done as the last step in the process.

For the most part, you are likely dealing with a situation where Windows 10 is not picking up the new RAM because it is not designed for the computer. You will want to make sure to look into this when inspecting the RAM as that is the most common reason for this problem to arise.

This guide will show what to do when Windows 10 won’t boot after a RAM upgrade.

Table of Contents

  • How To Fix Windows 10 That Won’t Boot After RAM Upgrade
    • 1. Check For Compatibility
    • 2. Use Old RAM To See If It Loads Up
    • 3. Check BIOS To See Which RAM Is Showing Up
    • 4. Flash The BIOS
  • Final Thoughts

How To Fix Windows 10 That Won’t Boot After RAM Upgrade

1. Check For Compatibility

You will want to start by looking at the RAM that was just added to the computer.

In some cases, you can end up buying incompatible RAM that does not get read by the computer. No matter what you do in a situation like this, the RAM will need to be replaced.

This is one of the first details to look into.

If you are unsure about whether or not your new RAM is compatible with the computer, start by reading the user manual. This will showcase what the RAM is compatible with and if it will work with your Windows 10 computer.

windows 10 won't boot after ram upgrade

2. Use Old RAM To See If It Loads Up

A good option to test your theory is to use the old RAM for a few minutes.

You are going to take out the new RAM and immediately replace it with the older one. This is to see whether or not it has an impact on the Windows 10 computer.

if the computer boots up as soon as the old RAM is put in, this means the new RAM is incompatible. If it does not boot up, this means there is something else wrong with the computer.

It could also be the bank where the RAM is slotted in. Look to see if everything is properly aligned and the RAM is going where it needs to.

3. Check BIOS To See Which RAM Is Showing Up

Now you will want to look at the motherboard.

You are going to head to the BIOS and see whether or not the RAM is getting read. If it is getting read, it will show up under memory. This is a clear sign the computer knows there is new RAM in place.

If it is not showing anything or the older RAM is still displaying as the only one available then the BIO has to be reset.

Do this by using the old RAM.

You will want to start the computer and look through the BIOS with the old RAM in place.

windows 10 won't boot after ram upgrade

4. Flash The BIOS

The last step is to flash the BIOS.

This is going to reset everything and help upgrade the firmware. This is only to be done when you have exhausted all other options and you are sure the new RAM is compatible with your Windows 10 computer.

Each computer is different.

This means you will have to go through the user manual to see how to flash the BIOS.

Final Thoughts

Look into these tips if Windows 10 won’t boot after a RAM upgrade.

If Windows 10 won’t boot after a RAM upgrade, start by looking at the new RAM to see whether or not it is compatible. To test this theory, remove the new RAM and replace it with the old one. If the computer starts, this means the new RAM is incompatible. If not, reset the BIOS by flashing it. This will reset it back to factory settings and should help read the new RAM.

You will want to go through all of the previous steps before considering flashing the BIOS.

Here’s More About Tech:

  1. Why Is RAM Pricier Than SSD?
  2. Causes Of Windows 10 Slowing Down After RAM Upgrade
  3. Would Low RAM Cause Stuttering?
  4. Can A Seagate External Hard Drive With No Light Get Repaired?
  5. Does An External Hard Drive Work As RAM For Macs?
  6. What Is The Solid Blue Light Work On A Seagate External Hard Drive?
  7. What Prevents A Gigabyte Motherboard From Reading A SATA Hard Drive?
Tags: Gadgets
Previous Post

Can RAM Cause Stuttering? (Solved)

Next Post

Why Is Windows 10 Slow After RAM Upgrade? (Fixed)

Next Post
windows 10 slow after ram upgrade

Why Is Windows 10 Slow After RAM Upgrade? (Fixed)

CATEGORIES

  • Gadgets
  • Networking
  • Social Media

RECOMMENDED

Why Is HP Envy 4520 Printing Blank Pages? (Fixed)
Gadgets

Why Is HP Envy 4520 Printing Blank Pages? (Fixed)

hp printer not printing color ink after refill
Gadgets

HP Printer Not Printing Color Ink After Refill (Fixed)

TAGS

Gadgets Networking Social Media
Call us: +1 234 JEG THEME

© 2023 JNews - Premium WordPress news & magazine theme by Jegtheme.

No Result
View All Result
  • #586 (no title)
  • About Us
  • Gadgets
  • Networking
  • Social Media

© 2023 JNews - Premium WordPress news & magazine theme by Jegtheme.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In