Netgear 5ghz Not Working (Fixed)

In this article, we will discuss some common reasons why a 5 GHz WiFi network might not be working, and provide some troubleshooting steps to try and resolve the issue.

5 GHz WiFi networks can offer faster speeds and less congestion than 2.4 GHz networks, but they can also be more prone to interference and have a shorter range. If you are experiencing issues with your 5 GHz WiFi network, there are a few things you can try to fix the problem.

We will cover some of these steps in more detail later in the article.

Whether you are having trouble connecting to the 5 GHz network or are experiencing poor performance, this article should provide some helpful information and guidance.

How To Fix Netgear 5ghz Not Working

There are a few things you can try if your Netgear 5 GHz network is not working:

1. Make sure that the device you are trying to connect to the 5 GHz network is compatible with 5 GHz. Some devices are only able to connect to 2.4 GHz networks.
2. Check that the 5 GHz network is enabled on your router. You can do this through the router’s web interface.
3. Make sure that the device you are trying to connect is within range of the 5 GHz network. The range of a 5 GHz network is typically shorter than that of a 2.4 GHz network, so it is possible that the device may be too far away to connect.
4. Try rebooting the router. This can sometimes resolve connectivity issues.
5. Check that the router’s firmware is up to date. Outdated firmware can cause connectivity issues. You can check for and install firmware updates through the router’s web interface.
6. If none of the above steps work, you may need to perform a factory reset of the router. This will erase all of the router’s settings and restore it to its default state. Be sure to write down any important settings before you reset the router, as you will need to set them up again after the reset.

I hope these suggestions help! If you are still having issues, it may be helpful to check the router’s manual or contact Netgear’s customer support for further assistance.

Why is my 5GHz not working but 2.4 GHz is?

There are a few possible reasons why your 5 GHz network might not be working, but your 2.4 GHz network is:

1. Compatibility issues: Some devices are only compatible with 2.4 GHz networks, and may not be able to connect to a 5 GHz network.
2. Range: The range of a 5 GHz network is typically shorter than that of a 2.4 GHz network, so it is possible that the device may be too far away from the router to connect to the 5 GHz network.
3. Interference: The 5 GHz frequency band is less crowded than the 2.4 GHz band, but it can still be affected by interference from other sources such as microwave ovens, cordless phones, and other electronics. This can cause connectivity issues for the 5 GHz network.
4. Router configuration: Make sure that the 5 GHz network is enabled on your router. You can check and change this setting through the router’s web interface.
5. Outdated firmware: If the router’s firmware is outdated, it can cause connectivity issues. Check for and install any available firmware updates through the router’s web interface.

How do I force a 5GHz WiFi connection?

To force a device to connect to a 5 GHz WiFi network, follow these steps:

1. Make sure that the device you want to connect is compatible with 5 GHz WiFi. Some devices are only able to connect to 2.4 GHz networks.
2. Check that the 5 GHz network is enabled on your router. You can do this through the router’s web interface.
3. On the device you want to connect, go to the WiFi settings and look for the list of available networks.
4. Select the 5 GHz version of your network from the list and try to connect to it. The network name (SSID) for the 5 GHz network is usually different from that of the 2.4 GHz network.
5. If the device is able to connect to the 5 GHz network, it will show as connected in the WiFi settings.

Final Thoughts

In conclusion, if your Netgear 5GHz network is not working, there are several steps you can take to troubleshoot and fix the issue.

These include checking the device settings to ensure that 5GHz is enabled, checking for firmware updates, verifying that the device is within range of the router, and making sure that there are no physical obstructions or interference affecting the signal.

If these steps do not resolve the issue, it may be necessary to reset the router or contact Netgear support for further assistance.

By following these troubleshooting steps, you should be able to successfully fix any issues with your Netgear 5GHz network.