If you’re experiencing issues with your HP Envy 4520 printer printing blank pages, you’re not alone.
This is a common problem that can have a variety of causes, but the good news is that it’s often relatively easy to fix.
In this article, we’ll go over four potential causes of this problem and how to address them.
We’ll also provide a conclusion with some additional tips for ensuring that your HP Envy 4520 printer continues to run smoothly.
Cause #1: Empty or Low Ink Cartridges
One of the most common reasons why your HP Envy 4520 printer may be printing blank pages is because it’s running low on ink.
If your ink cartridges are empty or nearly empty, the printer won’t be able to produce any printed output.
To fix this problem, you’ll need to replace the empty or low ink cartridges with new ones.
To replace the ink cartridges in your HP Envy 4520 printer, follow these steps:
- Open the printer’s ink cartridge access door. This is usually located on the front of the printer, and you may need to press a button or lever to open it.
- Locate the empty or low ink cartridges. These will typically be located in one or more slots on the right side of the printer.
- Carefully remove the empty or low ink cartridges from their slots. You may need to press down on a tab or lever to release them.
- Unpack the new ink cartridges and carefully remove the protective tape from them. Be sure not to touch the ink nozzles or electrical contacts on the cartridges, as this can cause them to malfunction.
- Carefully insert the new ink cartridges into their slots, making sure that they are securely seated.
- Close the ink cartridge access door, and then follow the on-screen instructions to complete the installation process.
Once you’ve replaced the empty or low ink cartridges, your HP Envy 4520 printer should be able to print normally again.
Cause #2: Clogged Printhead
Another common reason why your HP Envy 4520 printer may be printing blank pages is because the printhead is clogged.
The printhead is the part of the printer that applies the ink to the paper, and if it’s clogged, the printer won’t be able to produce a clear, legible output.
To fix this problem, you’ll need to clean the printhead.
To clean the printhead on your HP Envy 4520 printer, follow these steps:
- Open the printer’s ink cartridge access door, as described above.
- Locate the printhead, which is typically located in a separate compartment on the left side of the printer.
- Carefully remove the printhead from its compartment, being careful not to touch the ink nozzles or electrical contacts.
- Use a lint-free cloth or cotton swab moistened with warm water to gently clean the printhead. Be sure to remove any ink or debris that may be clogging the nozzles.
- Once the printhead is clean, carefully reinsert it into its compartment and close the ink cartridge access door.
- Follow the on-screen instructions to complete the cleaning process and prepare the printer for use.
After you’ve cleaned the printhead, your HP Envy 4520 printer should be able to produce clear, legible output again.
Cause #3: Misaligned Printhead
If the printhead on your HP Envy 4520 printer is misaligned, the printer may not be able to apply the ink properly to the paper, It’s best to go in and assess whether or not the printhead is in the right spot.
Doing this is going to help re-align the printhead, which is going to immediately fix the problem.
Open the HP printer to take a look at the printhead and see if it is too loose or needs to be adjusted. This will go a long way in delivering good results.
How do I clean the heads on my HP Envy 4520?
To clean the heads on your HP Envy 4520 printer, you can try the following steps:
- Make sure the printer is turned off and unplugged.
- Remove any paper or other obstructions from the printer.
- Moisten a lint-free cloth with warm water and gently wipe the print heads to remove any debris or dried ink. Be careful not to damage the print heads or allow them to become too wet.
- If the print heads are still dirty, you can try using a mild cleaning solution, such as isopropyl alcohol, to gently clean them. Be sure to follow the instructions on the cleaning solution and use it sparingly to avoid damaging the print heads.
If these steps do not work, you may need to replace the print heads on your printer.
Consult the user manual for your printer for instructions on how to do this. Alternatively, you can contact HP customer support for assistance.
How can you tell if a printhead is clogged?
Here are some signs that a printhead may be clogged:
- The printed output is faint or streaked, with gaps in the text or images.
- The colors in the printed output are not true to the original and may appear washed out or discolored.
- The printer is producing error messages or warning messages related to the printhead or the ink cartridges.
- The printer is not printing at all, or is only printing partially.
If you notice any of these issues, it may be a sign that the printhead on your printer is clogged and needs to be cleaned or replaced.
You can try cleaning the printhead using the steps described above to see if that resolves the issue.
If the problem persists, you may need to replace the printhead on your printer. Consult the user manual for your printer for instructions on how to do this.
Alternatively, you can contact the manufacturer for assistance.