When setting up a WIFI connection on your property, most people will have everything optimized for what’s inside the property.
This is due to how a router is used and where you are going to be sitting when connecting to it.
However, what if you want a WIFI connection outside the house? This is when it becomes important to figure out how to get WIFI from house to shop.
If you want to get WIFI from house to shop, place the router at least 4-5 feet off of the ground, set up a WIFI extender, and remove interfering items (i.e. cordless phones, wireless baby monitors).
In some cases, the best bet is going to be to run an ethernet cable from the router to the shop.
This is not always required when you can use a well-placed router and WIFI extenders. However, if there is a situation where an ethernet cable has to run from the router to the shop then it should be done safely. This includes running it underground.
If you don’t do this, the ethernet cable is going to be fully exposed and will get damaged.
This guide is going to show how to get WIFI from house to shop the right way. Follow the tips here and you will be golden.
Steps On How To Get WIFI From House To Shop
1. Place Existing Router 4-5 Feet Off Of The Ground
When figuring out how to get WIFI outside the house, you will want to start with the foundational component (i.e. your router).
If the router is not in the right spot, the rest of the setup is going to fail.
Your best bet is to start by figuring out where the router is located in the shop. You will want to make sure it is set in a way with the least physical barriers in the way.
For example, it should not be sitting on the floor.
This is going to make it much harder for the signal to get to where you want it to be.
Make sure the router is at least 4-5 feet off of the ground when looking to get WIFI out to a workshop.
2. Set Up A WIFI Extender
This is an important device when you want to get WIFI outside the house.
You will want to use what is known as a WIFI extender.
This is going to increase the range of your network to make sure it covers more space. It is common to use this in bigger properties and you will be doing the same outside.
The WIFI extender can be placed on the closest side of the property to make sure it reaches the shop.
3. Remove Interfering Items
This is a common issue when you are dealing with added distance.
You will want to make sure all interfering items are removed.
This can include a wireless baby monitor, a cordless phone, or a microwave.
These are just some items that run on the same frequency as the router and/or WIFI extender. If you don’t take the time to relocate or remove them, the router isn’t going to offer a reliable connection.
Look into this before working on the new connection or you will not see appropriate results.
4. Run Ethernet Cable To The Shop
This is an option that is not always needed.
This should only be done if the workshop is too far away from the house for a WIFI extender to be useful. At this point, you will want to take a look at running an ethernet cable from the router to the shop.
To do this, you will want to run it underground.
This will take a long time to set up, but it is the only way to stabilize the connection. Otherwise, it will get choppy and is not going to work the way you want it to.
Final Thoughts
These are the main steps on how to get WIFI from house to shop.
If you want to get WIFI from house to shop, start by setting the router 4-5 feet off of the floor. Next, remove interfering items such as cordless phones or wireless baby monitors from the area. Once done, set up a WIFI extender to increase the range of your router.
This is how you are going to get the WIFI to your workshop without compromising on your setup inside the house.
You will always have to customize how you go about managing the process. This is common and some will need an ethernet cable to make things work. Do what works best for you as that is how you are going to gain access to a reliable WIFI connection moving forward.
Here’s More About Tech:
