Laptop chargers go through significant wear and tear.
This is due to how often they are plugged in and out of laptops. If you are not careful, the laptop charger will tear and this can lead to exposed wiring.
If you are dealing with a situation such as this, it’s important to learn how to fix a laptop charger with exposed wires.
To fix a laptop charger with exposed wires, unplug the charger, twist the wires together, and wrap that end with a small tube. This will help enclose the exposed wires and allow the charger to work without issue.
It’s important to take your time with this process to ensure the exposed wires don’t slip out of the tubing. In general, you can invest in small tubing that is designed for exposed wiring and will work well in enclosing them instantly.
This process should take no longer than a few minutes.
Here is a detailed breakdown of what’s required when you learn how to fix a laptop charger with exposed wires.
Steps To A Laptop Charger With Exposed Wires
1. Unplug The Laptop Charger
If the laptop charger wire is exposed, you will need to immediately unplug it from the outlet.
This is dangerous.
You should not be leaving exposed wiring connected to an electrical source. The reason comes down to a sudden electrical charge coursing through the exposed wiring and electrocuting someone.
This is also a common reason for fires breaking out in homes. The exposed wiring from the laptop charger can spark at any moment and you don’t want it interacting with anything else. This includes the laptop.
You might even cause the laptop to burn or get overcharged.
In a situation such as this, you should immediately unplug the laptop charger from the wall. This will ensure the exposed wires in a laptop charger don’t cause electrocution or a fire to break out.
Be patient while doing this and make sure you are on top of things when it comes to fixing the exposed laptop charger at home.
2. Twist The Exposed Wires Together
You will now want to take the laptop charger and bring it under the light.
This is to ensure you can see what has happened to the exposed wire and what can be done about it. For the most part, it will be easy to fix this issue as long as the laptop charger is still functional.
Sometimes, it is difficult to fix frayed wires in a laptop charger because they are disconnected inside. This will lead to a situation where the laptop charger wires are hidden, but they still don’t work.
It is important to make sure the laptop charger is functional.
In most cases, it will be.
Now, you are going to want to take the laptop charger and begin twisting the exposed wires. The idea behind doing this is to make sure the wires are not split in different directions and you have a much easier time managing the situation.
This includes how the exposed wires are set up when you repair the laptop charger. You don’t want them to be all over the place inside the small tube you are going to use to enclose them.
3. Place Small Tube Around Exposed Wiring
Your goal here is to take a small tube and then wrap it around the exposed wiring.
This is going to ensure the exposed wiring does not get damaged by anything including your hands. You will want to make sure it is wrapped up and there is nothing better than a small tube that acts as a sleeve for the wires.
You are going to make sure the exposed wires are inside this “sleeve” at all times.
4. Secure The Tube
Now, you are going to want to secure the tube.
There are a few ways of doing this but the best option is to use electrical tape. While it is never recommended to use electrical tape to hold these exposed wires together, you can use it to hold the sleeve in place.
This will ensure the sleeve does not move or budge when you are putting the laptop charger into place.
For the most part, the tape is going to be secure and will allow you to have increased stability. This is key when you want to do things the right way and see appropriate results.
5. Test The Laptop Charger
You will want to test the laptop charger.
The goal here is to ensure you are considering all angles when it comes to how the laptop charger is set up. This includes how functional the laptop charger is when it is in use.
You don’t want a situation where you have enclosed the exposed wires in a laptop charger but it doesn’t work any longer. This can happen depending on how tight the sleeve is and what you did while twisting the wires.
Make sure you are not aggressive during that step as the wires are fragile.
This is especially the case when the exposed wires are already starting to fray.
When you test the laptop charger, it is important to see how fast it is. This includes how responsive the laptop is to the charger. If it works the same way as before then you are good to go.
What Not To Use To Fix Laptop Charger With Exposed Wires
1. Tape
This is a common mistake.
You never want to use tape when it is time to fix a laptop charger with exposed wires.
The tape might help cover the exposed wires, but it is not going to be good for how the laptop charger works. It will not respond well to the tape and the wires will likely get damaged.
The best option is to use a sleeve due to this reason. The sleeve is never going to ruin the wires and your tape can then go around that sleeve to hold it into place.
If you attempt to put electrical tape on top of exposed wiring, the results will likely be detrimental. it’s better to avoid doing this as it is not going to work out as planned.
2. Glue
You don’t want a situation where glue is being applied to a laptop charger wire.
This is simply unacceptable.
The glue is not going to hold anything together and will likely ruin the laptop charger for good. Plus, you are not going to appreciate the sticky feeling associated with the laptop charger whenever you want to use it!
It is far better to avoid using any type of glue to fix exposed wiring. It will not work nor is it safe.
At best, you are going to ruin the wiring and it is not going to work out in holding the exposed wiring in place. This means it is a lose-lose option and one you should not consider at all.
Can You Use A Charger If The Wire Is Exposed?
You can use a charger if the wire is exposed but it is not recommended. This is due to the exposed wire getting increasingly more damaged and the risk of a fire breaking out due to a surge of electricity. The charger can also burn out when this is the case along with ruining the charging laptop. It is better to unplug a charger in this state.
Can You Fix A Laptop Charger Wire?
You can fix a laptop charger wire as long as the fixture is still functional. It’s common for the wire to get bent or frayed. You can fix this using a small tube that goes around the exposed wire.
Final Thoughts
These are the tips to consider as you learn how to fix a laptop charger with exposed wires.
To fix a laptop charger with exposed wires, start by unplugging the charger. Now, twist the exposed wires together, place a small tube or sleeve around the wires, and then tape it into place. This will ensure the wires don’t damage anything and remain in good shape moving forward.
This is a simple fix and one you can finish within a few minutes.
Keep this in mind when it is time to fix a laptop charger with exposed wiring. The fix is not going to take a long time and it will help protect both your charger and laptop in the future.
Here’s More About Laptops:
