When using a computer, it’s common to expect it to boot up easily.
In some cases, you might end up seeing a screen that freezes as soon as it appears. This will be a screen that says “Gigabyte Insist On Ultra Durable” and refuses to go away.
This is when it becomes important to find out how to fix the “Gigabyte Insist On Ultra Durable” screen and get rid of it.
To get rid of the “Gigabyte Insist On Ultra Durable” screen, power on the computer and press delete/F10 repeatedly. Click “save and exit” at the top, next click load optimized defaults and set the Windows boot manager to boot #1. Save everything. Next, turn off the computer, remove the CMOS battery, and hold the power button for 10 seconds. This should fix the issue.
It’s important to work through these steps and make sure everything is connected properly.
Sometimes, all it takes is a loose connection for the motherboard to start acting up. The most common reaction is to mash buttons on the keyboard hoping something changes the loading screen.
In general, nothing will until you go through these steps one by one.
This guide will highlight each step in the process along with what you have to do to get rid of the “Gigabyte Insist On Ultra Durable” message.
Steps To Remove “Gigabyte Insist On Ultra Durable” Screen
1. Turn On The Computer & Press Delete/F10 Repeatedly
The first step is to turn on the computer.
You will want to not let the “Gigabyte Insist On Ultra Durable” screen appear. To ensure that does not happen, start pressing Delete or F10 as fast as you can.
You will want to do this repeatedly.
The idea is to access the main motherboard settings to begin working on diagnosing the problem. Until you fix the issue, the message is not going to go away.
2. Click “Save and Exit” and “Load Optimized Defaults”
At this stage, you will want to look at the top right.
You will notice the tab “Save and Exit” in the corner. You will click this and it will load a new screen.
Once it loads, you are going to look for “Load Optimized Defaults,” which will provide access to what is being booted by the main system. Look into this in detail and make sure the right system is being booted.
If you don’t look into this, the system is not going to work as intended.
3. Set Windows Boot Manager To Boot #1
At this stage, you are going to notice Boot #1 and Boot #2.
There will be specific items listed beside these two and you will want to read them.
The goal is to make sure you set the Windows boot manager as boot #1. If you don’t do this, you are not going to see good results at all and it will continue to freeze.
Be patient while doing this and make sure to save it once you are done. It will be the only way to get the results you need.
4. Turn Off The Computer & Remove The CMOS Battery
You will want to now turn off the computer.
It’s time to begin looking at the different components associated with the main system. This will include any loose connectors or the CMOS battery.
Your best bet is to remove the CMOS battery and see if it is fitted properly.
The reason for doing this is to make sure all of the internal components are in good shape. If anything is loose, this can become the number one reason for the computer not loading as it should.
You will end up getting the frozen screen that refuses to go away.
5. Hold The Power Button For 10-15 Seconds
You will now want to hold the power button.
The goal here is to reset everything by holding the power button for 10-15 seconds.
As soon as you do this, the computer is going to boot up and this time it will do it properly. If you continue to see the same message, it’s time to work through the same steps again and take a deeper look at the internal components to see if something has not been attached properly.
This does happen and sometimes a simple look at the system will not suffice. You will have to look deeper.
Final Thoughts
When looking to get rid of the “Gigabyte Insist On Ultra Durable” screen, the steps listed here will go a long way.
To get rid of the “Gigabyte Insist On Ultra Durable” screen:
- Start The Computer And Press F10/Delete Repeatedly
- Click “Save and Exit” and then click “Load Optimized Defaults”
- Set Windows Boot Manager As Boot #1
- Turn Off The Computer
- Remove The CMOS Battery
- Press And Hold The Power Button For 10-15 Seconds
These steps will take care of the problem and make sure it does not bother you again.
Here’s More About Tech:
- Why Is WiFi Not Working With Gigabyte Motherboard?
- Is The Gigabyte Motherboard A Good Buy?
- What Makes A Gigabyte Motherboard Not Recognize A Hard Drive?
- What Causes A Seagate Hard Drive To Have A Blue Light?
- Best Advice To Handle Data In A Seagate External Hard Drive
- Should A Hard Drive Work Well Upside Down?
