When it’s time to start using Gigabit Internet, you are going to want to exhaust all options to ensure the speed is fully optimized.
It’s normal to assume the switch is going to be seamless and it will work out as intended. However, there can be initial pains when it comes to setting things into motion and maximizing how the Internet works once everything is said and done.
This is when you have to wonder why the Gigabit switch is not full speed.
If the Gigabit switch is not full speed, start by restarting the router, check the connections, and make sure the router is placed within range. It’s also recommended to check other devices to see whether or not this is a problem reserved for one device.
For the most part, there is no reason to panic when you are not getting full speed with the Gigabit connection. This can happen.
What you want to do is go through the steps, look at each component, and make sure everything is in sync. If you take this approach, you will find out what the root cause of the poor speed is.
This guide will help pinpoint what is required when the Gigabit switch is not full speed or in line with what you had hoped for.
Steps On How To Deal With Gigabit Switch That’s Not Full Speed
1. Check The Ethernet Switch
When the Gigabit network is not running at Gigabit speeds, you will want to start with the ethernet switch.
For the most part, you are not going to have to worry about the switch itself.
It should not have much of an impact on the overall speed or performance as long as it’s functional. This is why the only thing you will want to take a look at will be the switch’s overall functionality along with how old the part is.
If the switch is new and in good shape then this is not the problem.

2. Restart The Router & Device
You will want to take the time to restart both the device you’re connecting and the Gigabit router.
The reason for doing this is to make sure everything has been reset and gets a chance to reconnect to the device. If you are not doing this, the overclocking on the device might be the root cause of the reduced speed.
Just take the opportunity to restart both the router and device.
This will allow you to reconnect to the router and see if that improves the speed. Sometimes, this will reset everything and improve the connection instantly.
3. Inspect All Connections
Your goal should be to inspect all relevant connections within the setup.
Look at the ethernet cable that is running to the Gigabit router. This will allow you to determine whether or not the connection is loose. If so, this might be the reason for the reduced speed.
It is also important to look at the placement of the ethernet cable.
You don’t want a situation where a data cable is close to a power cable. This can interfere with performance and is going to take away from how well the connection functions.
You should look at each connection to make sure it is secure.

4. Move The Router Closer
Once you have checked the connection and cables, it is time to move on to the router’s location.
Sometimes, the location is the main issue.
If it is too far away from the device, this is going to be the reason for the speed deteriorating.
You should look to move the router to a more efficient spot. This will ensure the device can easily connect to the router and maintain the speed you are expecting.
If the router is closer, you are going to have less interference when it comes to overall speed.
Final Thoughts
These are important steps when the Gigabit switch is not full speed.
If the Gigabit switch is not at full speed, start by restarting both the router and the device you’re connecting. Next, inspect the ethernet switch for damage, check the cables, and make sure the router is set in a location that is easy to connect to.
These are the simple details that will matter when it comes to managing a Gigabit switch the right way.
If you don’t do this, you are not going to see good results over the long haul.
The performance of a router is often reliant on the factors mentioned here. Take these into account when revamping your setup.
Here’s More About Routers: